Emergency measures for N-methyl pyrrolidone
Inhalation: If you inhale N-methyl pyrrolidone, move the patient to fresh air. If breathing stops, carry out artificial breathing. Consult a doctor.
Skin contact: Rinse with soap and plenty of water. Consult a doctor.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a doctor.
Eating N-methyl pyrrolidone: No vomiting. Never feed anything to the unconscious through the mouth. Rinse your mouth with water. Consult a doctor.
Fire protection measures
Extinguishing method and extinguishing agent: use water mist, resist ethanol foam, dry powder or carbon dioxide to extinguish fire.
Special hazards arising from this substance or mixture: carbon oxides, nitrogen oxides < br />. Emergency management of N-methyl pyrrolidone leakage
Operators'protective measures, protective equipment and emergency disposal procedures: use personal protective equipment. Avoid inhaling steam, smoke or gas. Ensure adequate ventilation. Remove all sources of fire. Personnel evacuated to safe areas. Beware of vapor accumulation to explosive concentrations. Steam can accumulate in low-lying areas.
Environmental protection measures: If safety can be ensured, measures can be taken to prevent further leakage or spillover. Do not let the product enter the sewer.
Containment and removal methods of leaking chemicals and disposal materials used: containment of spills, collection of spills with an anti-electric vacuum cleaner or wet brush, and placement in containers, according to local regulations. Put it in a properly sealed container for disposal. [3]
Contact Control and Personal Protection Editor
Technical Control
Operate according to good industrial hygiene and safety standards. Wash your hands before and after work.
Individual protective equipment
Eye/Face Protection: Safety eyeglasses with protective side shields meet EN166 requirements. Use equipment tested and approved by official standards such as NIOSH (USA) or EN166 (EU) to protect eyes.
Skin protection: Gloves and gloves must be checked before use.
Physical protection: Anti-penetration clothing and protective equipment types must be selected according to the concentration and quantity of dangerous substances in a particular workplace.
Respiratory system protection: If the hazard assessment indicates the need to use air purification gas masks, please use full-face multi-function gas masks (US) or ABEK gas masks (EN14387) as alternate for engineering control. If gas masks are the only way to protect, then use a full-face air supply gas mask. Respirators use breathers and parts that have been tested and passed government standards such as NIOSH (US) or CEN (EU).